Only about 10% of cassava raw material in the world are used for trade purposes directly. Major cassava products import countries  include the United States, China, Japan and other countries. On the other hand, cassava processing is widely in the world. In addition  to more than 65% used for direct consumption as food, the deep processing is mainly used in the starch production from cassava,  then further processed into citric acid, lysine, glucose, fructose and other products. So the machine used for starch production from  cassava is hot selling worldwide. Next form is the main machine used for starch production from cassava.For another, in the process of starch production from cassava, the main technology process as below:

Procedure 1: Cleaning and washing(click to see the video)Cassava cleaning usually adopt the two section process for starch production from cassava. Dry sieve can effectively remove dirt,  sand and small stones, it has the ability to avoid sewage disposal. According to multiple spiral operation, paddle washing machine  can remove silts and impurities from the surface of cassava. This section can be performed manually. The first starch production from  cassava is able to clean the outer peel, at the same time the very superficial peel of cassava will be simply handled.

Procedure 2: Crushing to get starch slurry,AD Company advanced crushing machine rasper used for starch production from cassava can make the starch extraction rate  reach to more than 95%. After cassava crushed by rasper, fully free the starch, get the starch slurry.

Procedure 3: Screening

Centrifuge sieve is mainly used to separate the fiber from starch slurry. It is widely used in the starch produdction from cassava tubers.  The sieve basket is made of titanium plate, with laser punching processing. There are some advantages of the machine: low power  consumption, stable operation and high starch extraction rate. Thenn fine fiber sieve will be used in the further seperate section to get  rid of fine fiber in starch slurry. This is the purify machine used for starch production from cassava, aimed to screening the insoluble  impurities out.

Procedure 4: Concentrating

Disc separator is a highly efficient and advanced protein separation equipment, it can isolate about 80 percent of the protein at one  time, after the second separation of starch milk can reach less than 0.5 percent of the protein content. Hydro cyclone station will  remove fiber, protein and cell to further process starch milk. These two machines used for starch production from cassava can remove  the soluble materials from starch milk. This procedure starch production from cassava is designed to improve the quality and purity of  the finished products.

Procedure 5: Dewatering and Drying

    After concentrating and purifying, the starch slurry water content stiil high, so need to dewatering by the vacuum filter to get the wet  starch which moisture is under 40%, the adopt the flash dryer as the drying machine used for starch production from cassava, after  this, get the final starch products with moisture content 12%-14%, meet the standard, then can be packed.Above all, this is AD Company machine and technology used for starch production from cassava introduction. In addition, the food  industries are one of the largest consumers of starch and starch products. In addition, large quantities of starch are sold in the form of  products sold in small packages for household cooking. Cassava, sago and other tropical starches were extensively used for food  prior to the Second World War, but their volume declined owing to the disruption of world trade caused by the war. Attempts were  made to develop waxy maize as a replacement for normal nonce real starches; but the production of cassava starch has increased  considerably in recent years. The market of starch production from cassava is expanding and has enormous potential.